2000kg ATM Load Rating
- FULLY FRAMED TRADESMAN TOP with tapered sides (NOT LIKE OTHERS WITH NO FRAME)
- Tradesman canopy built from the top of the sides 1170mm high from the floor of the trailer to the roof
- FULL LENGTH SIDE LIFT UP DOORS
- ONE FLUSH LOCK PER DOOR
- FULLY FRAMED DOORS
- ONE PIECE FRONT & REAR PANEL
- H-frame ladder racks
- Rolled Checker Plate body with 300mm High Side
- Heavy duty chassis 50×50
- DRAW BAR 75X50
- Double folded checker plate guards FOR A MODERN LOOK
ADVANCED – INDEPENDENT TORSION SUSPENSION (ITS)
- MECHANICAL DISC BRAKES
- 50MM OVERRIDE LOCKABLE COUPLING
- Full length side tie rails
- SPARE WHEEL HOLDER mounted on the draw bar
- LED 12-24v lights (in Light Guard) with 7-pin large round plug
- Front & sides reflectors, Led front clearance lights fitted to 5ft wide trailers & over
- Rubber mudflap Brand
- New 14” Sunraysia Rims with 185C new tyres
- 6″ Swing up Jockey wheel 350kg
- BODY SCRAPED TO REMOVE AS MUCH WELDING SPLATTER AS POSSIBLE – CLEANED WITH WAX & GREASE REMOVER, THE CHASSIS & TOP ETCH PRIMED THEN FINISHED WITH TOP OF TRAILER COATED IN HIGH QUALITY POLYTHANE 2-PACK PAINT
WHAT IS ITS SUSPENSION: INDEPENDENT TORSION SUSPENSION
ITS axles have a straightforward, attached construction with a torsion suspension system. Four rubberized cords are inside the axle housing which handle suspension travel and shock absorption. In addition, this system offers trailer rigidity as the axle is bolted to the trailer frame.
The main advantages of a torsion bar suspension are soft ride due to elasticity of the bar, durability, and small profile along the width of the vehicle.
Smother ride & lower more ground clearance:
Self-damping action and independent suspension, ITS delivers a smooth, quiet ride like no other – adding up to an improved towing experience. Also, by bolting the axle up close to the chassis this give more ground clearance than traditional spring & axle setup.
Except for periodic inspection of the fasteners used to attach the ITS axle to the Trailer frame, no other suspension maintenance is required on ITS axles. They are, of course, subject to normal maintenance and inspection procedures regarding brakes, hubs, bearings, seals, wheels and tyres.
Traditional leaf springs, axles and all the componentry may fatigue over time and break whereas the ITS suspension has less componentry eliminating this issue.